Ideal example
Structure supports exterior surface
2
1
1
Siding
2
Structure behind siding
Concrete
R
Do not use the included screws. Use screw
anchors (screw ø: 4 mm) designed for
concrete walls.
R
Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R
Drill a pilot hole. Remove any debris after
drilling the pilot hole.
1
Mark the hole depth on the drill bit (
1
)
and then drill a pilot hole.
1
2
Remove debris.
3
Insert an anchor, tighten the screw, then
remove the screw to secure the anchor.
4
Insert the screw and tighten it.
2
2
Camera mounting stand
ALC (autoclaved lightweight cellular
concrete)
R
Depending on the type of ALC panel, you
may not be able to attach the camera.
Consult the ALC panel manufacturer.
R
Do not use the included screws. After
consulting the manufacturer of the ALC
panel, use only commercially-available
metal screw anchors (screw ø: 4 mm)
designed for ALC panels.
R
Carefully read the instructions supplied with
the anchors. Follow instructions regarding
drill bit diameter, hole depth, etc.
R
Drill a pilot hole. Remove any debris after
drilling the pilot hole.
R
Seal the pilot hole with a
commercially-available waterproof sealant.
Other materials (mortar, tile, etc.)
R
Do not use the included screws.
R
Consult the builder or licenced professional
regarding the type of anchor appropriate for
the installation location and materials.
R
Do not install on gypsum board or concrete
blocks.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
21
Setup
HNC600E_(en_en)_1227_ver.102.pdf 21
2016/12/27 23:35:23