3
Attach the camera to the stand using the
stand attachment hole on the rear or
bottom of the camera, depending on the
direction you want to aim the camera.
R
Loosen the screw (
1
).
R
Insert the tip of the stand (
A
) into the
stand attachment hole (
B
) on the rear
or bottom side.
R
Secure the camera by tightening the
screw (
2
).
Attaching to the hole on the rear side
1
1
2
2
Attaching to the hole on the bottom
side
1
2
1
2
4
Adjust the camera angle.
R
Loosen the screw (
1
) and then adjust
the camera to the desired angle.
R
Tighten the screw (
1
) while holding
the screw (
2
) until the camera is
secure.
1
1
2
20
Setup
HNC600AZ_(en_en)_0325_ver.040.pdf 20
2015/03/25 14:34:18