Operating Instructions
10
3.
Click
[Network Configuration].
Network Camera List window
appears. The
Setup program finds all Network Cameras connected on your local network. It
lists all of MAC addresses and IP addresses of Network Cameras. Network
Cameras that are isolated by the use of a home gateway or broadband router
will not be detected. Record their MAC addresses on the Network Camera
Memo on page 3 in the Operating Instructions. It is useful for customer
servicing.
Notes
•
The setup program finds and identifies Network Cameras by listening for
data, which the Network Cameras send out for the first 20 minutes after
powering up. If the installation is not completed within 20 minutes,
disconnect temporarily the AC adaptor to restart this operation.
•
Each Network Camera has a unique MAC address labelled on the bottom.
Refer to page 15 in the Operating Instructions.
•
Network Cameras that are isolated by the use of a home gateway or
broadband router will not be detected.
(A)
