Panasonic KX-FT932FX, Руководство по эксплуатации

Страница: 35 / 52

8. Programmable Features
35
L
This feature is not valid if you select “
PHOTO
”
resolution for sending (page 20) or copying (page 27)
a document.
Code #59: Setting the print contrast
PRINT CONTRAST
=NORMAL [
±
]
To adjust the darkness of received or copied documents.
“
NORMAL
” (default): Normal contrast.
“
DARKER
” : Darker contrast.
Code #67: Setting the incoming message monitor
(KX-FT938 only)
ICM MONITOR
=ON [
±
]
To select whether the greeting message is heard
through the unit’s speaker when the unit answers a call.
“
ON
” (default): You can monitor the incoming message.
“
OFF
” : Deactivates this feature.
Code #70: Calling your pager (KX-FT938 only)
PAGER CALL
=OFF [
±
]
See page 31 for details.
Code #73: Changing the receiving mode in the
manual answer setting
MANUAL ANSWER
=TEL [
±
]
“
TEL
” (default): Telephone mode (page 24)
“
TEL/FAX
” : Telephone/Fax mode (page 25)
Code #76: Setting the connecting tone
CONNECTING TONE
=ON [
±
]
If you often have trouble when sending faxes, this feature
allows you to hear connecting tones: fax tone, ring back
tone and busy tone. You can use these tones to confirm
the status of the other party’s machine.
“
ON
” (default): You will hear connecting tones.
“
OFF
” : Deactivates this feature.
Note:
L
If the ring back tone continues, the other party’s
machine may not be a fax machine or may have run
out of paper. Check with the other party.
L
The connecting tone volume cannot be adjusted.
Code #77: Changing the receiving mode in the auto
answer setting (KX-FT938 only)
AUTO ANSWER
=TAM/FAX [
±
]
“
TAM/FAX
” (default): Telephone Answering
Machine/Fax mode (page 25)
“
FAX ONLY
” : FAX only mode (page 26)
Code #78: Changing the TEL/FAX delayed ring
setting
TEL/FAX RING
RINGS=2 [
±
]
If you use an extension telephone in TEL/FAX mode,
select the desired number of times the extension
telephone rings before the unit answers the call. You can
select
“
1
” , “
2
” (default), “
3
” , “
4
” , “
5
” , “
6
” , “
7
” , “
8
” or
“
9
” . See page 25 for details.
Code #80: Resetting advanced features to their
default settings
SET DEFAULT
RESET=NO [
±
]
To reset the advanced features:
1. Press
{
MENU
}
.
2. Press
{#}
, then
{
8
}{
0
}
.
3. Press
{A}
or
{B}
repeatedly to select “
YES
” .
4. Press
{
SET
}
.
5. Press
{
SET
}
again.
6. Press
{
MENU
}
.
8.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit number) and
direct command.
For more details on the features, see page 32 to page
35.
1
Press
{
MENU
}
.
2
Press
{#}
and the 2-digit code number.
3
Press the desired direct command to display the
desired setting.
L
This step may be slightly different depending on
the feature.
4
Press
{
SET
}
.
5
To exit programming, press
{
MENU
}
.
8.4.1 Program code and direct command
button
{#}{
0
}{
1
}
Date and time
L
Enter the date and time using the dial keypad. See
page 11 for details.
{#}{
0
}{
2
}
Your logo
L
Enter your logo using the dial keypad. See page 12
for details.
{#}{
0
}{
3
}
Your fax number
L
Enter your fax number using the dial keypad. See
page 13 for details.
FT932-938FX_PFQX2588ZA-en.book Page 35 Thursday, June 15, 2006 8:30 AM