Answering
Device
65
Operating from a remote location
!
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (p. 66) and set the unit to the TAD/FAX mode before
going out (p. 56).
Remote Operation
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Answering Device
Remote Operation
Notice of Remote Operation
Fold here
1. Call your unit.
2. Enter the remote operation ID
during the greeting
message.
●
The new recorded
messages will be played
automatically.
3. Press the remote command
key(s) (see the reverse side)
within 10 seconds.
If there are no new messages
in step 2, press the remote
command key(s) within 4
seconds or wait for 4
seconds, and all the recorded
messages will be played back.
●
The remote operation is
available only from a touch
tone telephone when the unit
is in the TAD/FAX mode.
●
When the unit is in the TEL
mode, call your unit and wait
for 15 rings. The answering
device will temporarily answer
the line. Enter the remote
operation ID during the
greeting message. The unit will
switch to the TAD/FAX mode.
●
When you press a key, press
firmly.
●
To send a document, press
. When a fax tone is
heard, start transmission.
9
69
Dial Key
Remote command
Page
0
Skips the greeting message
1
Repeats a message
67
2
Skips a message
Room monitor
Re-records a greeting message
67
4
5
6
7
New message playback
All message playback
67
67
68
68
Stops re-recording of a
greeting message
9
68
Dial Key
Remote command
Page
4
Erases a specific message
68
5
Erases all messages
Turns OFF message transfer for
incoming messages.
68
8 0
8 1
8 2
Changes to the TEL mode
Turns ON message transfer for
incoming messages
69
69
69
Turns ON pager call for incoming
messages
8 3
69
Turns OFF pager call for incoming
messages.
8 4
69