9. Help
49
L
The unit has a document in memory. See the
other displayed message instructions to print
out the document.
FAX MEMORY FULL
L
The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 12)
or clear the jammed paper (page 53).
L
When performing memory transmission, the
document being stored exceeded the
memory capacity of the unit. Transmit the
entire document manually.
FILM EMPTY
L
The film is empty. Replace the film with a new
one (page 8).
L
The ink film is slack. Tighten it (page 11) and
install again.
L
The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.
FILM NEAR EMPTY
L
The remaining film is low. Prepare a new film
(page 8).
MEMORY FULL
L
When making a copy, the document being
stored exceeded the memory capacity of the
unit. Press
{
STOP
}
to clear the message.
Divide the document into sections.
MESSAGE FULL
L
There is no room left in memory to record
voice messages. Erase unnecessary
messages (page 36, 40).
MODEM ERROR
L
There is something wrong with the modem
circuit. Contact our service personnel.
NO FAX REPLY
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
OPEN CABINET
CHECK FILM SLACK
b
OPEN CABINET
CHECK FILM TYPE
L
The ink film is empty. Replace the ink film
with a new one (page 11).
L
The ink film is not installed. Install it (page
10).
L
The ink film is slack. Tighten it (page 11).
L
The fax machine is positioned near
appliances such as TVs or speakers which
generate an intense magnetic field.
PAPER JAMMED
L
A recording paper jam occurred. Clear the
jammed paper (page 53).
PLEASE WAIT
L
The unit is checking that there is no slack or
crease on the ink film. Wait for a moment
while the check is completed.
POLLING ERROR
L
The other party’s fax machine does not offer
the polling function. Check with the other
party.
REDIAL TIME OUT
L
The other party’s fax machine is busy or has
run out of recording paper. Try again.
REMOVE DOCUMENT
L
The document is jammed. Remove the
jammed document (page 55).
TRANSMIT ERROR
L
A transmission error occurred. Try again.
UNIT OVERHEATED
L
The unit is too hot. Let the unit cool down.
Frequently Asked Questions
9.3 When a function does
not work, check here
9.3.1 General
I cannot make and receive calls.
L
The power cord or telephone line cord is not
connected. Check the connections.
L
If you used a splitter to connect the unit,
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
FP343-363HK.book Page 49 Thursday, July 31, 2003 2:45 PM
Содержание KX-FP343HK
Страница 59: ...9 Help 57 7 Connect the power cord and the telephone line cord ...
Страница 65: ...63 ...