background image

85

Receiving Faxes

Fax/Copy

Silent detection

(KX-FP300 only)

(receiving faxes from older model fax machines)

This feature allows the unit to activate the fax function automatically if a silent pause longer than 4 seconds is
detected when using an answering machine.

Helpful hints:

If you wish to receive documents from fax machines that do not send a fax calling tone, activate this feature.

If you use an answering machine to give greeting messages and record incoming messages on a single
cassette tape, deactivate this feature.

1

Press .

Display:

2

Press , 

then 

.

3

Press .

4

Press 

or 

to select the desired setting.

If this feature is not required, select “OFF”.

5

Press .

6

Press .

MENU

SETUP ITEM [  ]

START/SET/COPY

MODE=ON

▼▲

START/SET/COPY

SILENT DETECT.

4 0

1.SYSTEM SET UP

MENU

MENU

START/SET/COPY

/

Using the unit and a computer on the same line

(KX-FP320/KX-FM330 only)

Wall jack

Computer

Fax machine

Wall jack

We recommend you use separate wall jacks for the unit and the computer.
If you use the Multi-Function software (PANA LINK), follow the instructions on PANA LINK Software Guide
(KX-FM330 only).

Note:

Set the TEL mode on the fax machine.

The device which has the shortest ring count will answer a call first.

Содержание KX-FP300E























































































































































Отзывы: