8. Programmable Features
40
Changing the fax
activation code
{#}{
4
}{
1
}
If you wish to use an extension telephone (page 27) to receive
faxes, activate this feature and program the activation code.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
1.
{
MENU
}
i
{#}{
4
}{
1
}
2.
Press
{
1
}
to select
“
ON
”
.
i
{
SET
}
3.
Enter your code from 2 to 4 digits, using 0-9,
{*}
and
{#}
.
L
The default code is
“
;
#9
”
.
4.
{
SET
}
i
{
MENU
}
Setting the memory
reception alert
{#}{
4
}{
4
}
To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
{#}{
4
}{
6
}
To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{
0
}
“
OFF
”
: You have to press
{
FAX START
}
for fax reception.
{
1
}
“
ON
”
(default): You do not have to press
{
FAX START
}
for fax
reception.
Setting the fax voice
guidance
{#}{
4
}{
7
}
If you wish to hear voice guidance for fax transmission/reception,
activate this feature.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
{
2
}
“
ERROR
”
: To hear voice guidance only when fax
transmission/reception fails.
Changing the recording
time for your TAM/FAX
greeting message
{#}{
5
}{
4
}
{
1
}
“
16s
”
(default): Maximum recording time is 16 seconds.
{
2
}
“
60s
”
: Maximum recording time is 60 seconds.
See page 33 for details.
Setting the incoming
message monitor
{#}{
6
}{
7
}
To hear an incoming message (ICM) from the speaker when the
answering machine is recording the message.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
Setting the Error
Correction Mode (ECM)
{#}{
6
}{
8
}
This feature is available when the transmitting/receiving fax
machines are ECM compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
Note:
L
You cannot change the setting when received documents are
in memory.
Feature
Feature code
Selection
FP215-PNQX1896ZA-OI-en.book Page 40 Tuesday, December 23, 2008 11:09 AM
