8. Help
46
8.3.3 Fax – sending
8.3.4 Fax – receiving
Problem
Cause & Solution
I cannot send documents.
L
The telephone line cord is connected to the
[
EXT
]
jack on the unit. Connect
to the
[
LINE
]
jack (page 12) (KX-FP207 only).
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
L
The other party’s machine is not a fax machine. Check with the other party.
L
The other party’s fax machine failed to answer the fax automatically. Send
the fax manually (page 20).
L
The memory is full of received documents and the quick scan (feature #34
on page 38) is ON. Turn this feature OFF, and send the fax again.
I cannot send a fax overseas.
L
Use the overseas transmission mode (feature #23 on page 37).
L
Add two pauses at the end of the telephone number or dial manually.
The other party complains
that letters on their received
document are distorted or not
clear.
L
If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
L
An extension telephone on the same line is occupying the line. Hang up the
extension telephone and try again.
L
Try copying the document with this unit. If the copied image is clear, there
may be something wrong with the other party’s machine.
L
Adjust the scan contrast using feature #58 (page 39).
The other party complains
that black lines, white lines or
smudges appear on their
received document.
L
The scanner glass or rollers are dirty with correction fluid, etc. Clean them
(page 52). Please do not insert a document before correction fluid has dried
completely.
Documents frequently
misfeed.
L
Clean the document feeder rollers, recording paper feeder and rubber flap
(page 52).
Problem
Cause & Solution
I cannot receive documents.
L
The telephone line cord is connected to the
[
EXT
]
jack on the unit. Connect
to the
[
LINE
]
jack (page 12) (KX-FP207 only).
L
The ink film is empty. Replace the ink film with a new one (page 8).
I cannot receive documents
automatically.
L
The receiving mode is set to TEL mode.
Change the receiving mode:
–
KX-FP207: FAX ONLY mode (page 25) or TEL/FAX mode (page 25)
–
KX-FP218: TAM/FAX mode (page 26), FAX ONLY mode (page 25) or
TEL/FAX mode (page 25)
L
The time taken to answer the call is too long. Decrease the number of rings
in feature #06 (page 35) and #78 (page 40).
L
The greeting message is too long. Record a shorter message (page 31).
The display shows
“
CONNECTING.....
”, but
faxes are not received.
L
The receiving mode is set to FAX ONLY mode and the incoming call is not
a fax. Change the receiving mode:
–
KX-FP207: TEL mode (page 24) or TEL/FAX mode (page 25)
–
KX-FP218: TEL mode (page 24), TAM/FAX mode (page 26) or TEL/FAX
mode (page 25)
FP207-218FX-PFQX2515ZA-en.book Page 46 Friday, June 30, 2006 11:58 AM
Содержание KX-FP207FX
Страница 58: ...58 Notes ...
Страница 59: ...59 Notes ...