43
Advanced
Operations
Answering device
Recording your own greeting messages
The recording time is limited to 16 seconds for each message. Record your message within 12 seconds for
optimum performance.
¡
As for the ANS/FAX greeting message, you can choose either 16 seconds or 60 seconds of recording time
(see page 66).
ANS/FAX greeting message
TEL/FAX greeting message
Message transfer greeting message
“This is (your name, business and/or telephone number). We are
unable to answer right now. To send a fax, start transmission. To
leave a message, speak after the beep. Thank you.”
“This is (your name, business and/or telephone number). Please
wait for someone to answer your call. To send a fax, start
transmission.”
“This is a transferred message from (your name, business and/or
telephone number). Please enter your remote ID for remote
operation.”
Note:
¡
If you do not record any messages, pre-recorded messages will be played (see pages 25 and 45).
1
Open the station key panel.
2
Press
(SELECT)
until the following is displayed.
■
For the ANS/FAX greeting:
Display:
■
For the TEL/FAX greeting:
■
For the message transfer greeting:
3
Press
(REC)
.
¡
A long beep will sound.
4
Speak clearly 20 cm (8 inches) away from the
microphone.
¡
The display will show the elapsed recording time.
Example: ANS/FAX greeting
5
When finished, press
(STOP)
.
¡
The unit will repeat your message. Adjust the
volume using
(VOLUME)
.
ANS REC. 02s
TRNS-GREETING
TEL-GREETING
ANS-GREETING
Note:
¡
If you make a mistake while recording, repeat
from step 2.
(SELECT)
Microphone
(STOP)
(VOLUME)
(REC)
Station
key panel
Suggested messages
Recording a greeting message