33
Advanced
Operations
1
2
3
4
5
6
7
8
9
0
Storing telephone numbers for automatic dialing
The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch dialing: 18 stations (Each of the 9 direct station keys is divided into an upper station and a lower
station).
Speed dialing:
This unit is equipped with 100 additional dialing stations. These stations are assigned to
2-digit numbers (00–99).
1
Press
(MENU)
until the following message is
displayed.
Display:
2a
One-touch dialing:
For upper stations (1–9)
Press one of the direct call station keys.
a:
For lower stations (10–18)
Press
(LOWER)
, then press one of the direct
call station keys.
2b
Speed dialing:
Press
K
, then press the desired 2-digit number
(00–99).
3
Enter the telephone number up to 30 digits in
length.
¡
To enter a hyphen in a telephone number, press
(HYPHEN)
(direct call station 8).
4
Press
(START/COPY/SET)
.
5
Enter the station name, up to 10 characters, by
following the instructions on page 14.
6
Press
(START/COPY/SET)
.
¡
To program other stations, repeat steps 2a (or
2b) to 6.
7
Press
(STOP)
.
NAME=
STORE TEL NO.
To keep the telephone number
confidential
Press
(SECRET)
(direct call station 3) after
entering the telephone number.
¡
The telephone number will not appear on the
display or the telephone number list.
¡
(SECRET)
is not counted as a digit.
To erase a stored number and
station name
Press
(STOP)
in step 3 to erase the telephone
number. Press
(DELETE)
(direct call station 7)
repeatedly in step 5 until all of the characters are
erased.
Then press
(START/COPY/SET)
.
Helpful hint:
¡
To confirm stored telephone numbers and
station names, print a telephone number list
(see page 70).
(MENU)
(LOWER)
(STOP)
(START/COPY/SET)
Speed dial
stations
Direct call
stations
(DELETE)
(SECRET)
(HYPHEN)
Automatic dialing
