8. Programmable Features
57
Sending a fax at a specific
time
{#}{
4
}{
1
}{
2
}
This feature allows you to take advantage of low-cost calling hours
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
To send a document:
1.
Insert the document.
2.
If necessary, press
{
RESOLUTION
}
repeatedly to select the
desired resolution (page 30).
3.
Press
{
MENU
}
.
4.
Press
{#}
, then
{
4
}{
1
}{
2
}
.
5.
Press
{
1
}
to select
“
ON
”
.
6.
Press
{
SET
}
.
7.
Enter the fax number.
L
To enter an item using one-touch dial feature and navigator
directory, see step 4, “4.3 Sending a fax using one-touch dial
feature and navigator directory”, page 32. (When using
navigator directory, you do not have to press
{
<
}
or
{
>
}
before
pressing
{A}
or
{B}
.)
8.
Press
{
SET
}
.
9.
Enter the transmission start time.
L
Press
{*}
repeatedly to select
“
AM
”
or
“
PM
”
.
10.
Press
{
SET
}
.
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Setting the Error
Correction Mode (ECM)
{#}{
4
}{
1
}{
3
}
This feature is available when the sending/receiving fax machines are
ECM compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax transmission /
reception, the fax machine will support the communication.
Setting the connecting
tone
{#}{
4
}{
1
}{
6
}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other party’s machine.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear connecting tones.
L
If the ring back tone continues, the other party’s machine may not
be a fax machine or may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
4
}{
3
}{
0
}
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
See page 40 for details.
Setting the ring pattern
for fax (Distinctive Ring
feature)
{#}{
4
}{
3
}{
1
}
{
1
}
“
A
”
{
2
}
“
B
”
{
3
}
“
C
”
{
4
}
“
D
”
{
5
}
“
B-D
”
(default)
See page 41 for details.
Feature/Code
Selection
FLM653FX-PFQX2394ZA-en.book Page 57 Thursday, November 24, 2005 4:57 PM
