16
Setup
Toner cartridge and drum unit
!
Caution:
●
Read the instructions below before you begin installation. After you have read them,
open the drum unit protection bag. The drum unit contains a photosensitive drum.
Exposing it to light may damage the drum. Once you have opened the protection bag:
— Do not expose the drum unit to light for more than 5 minutes.
— Do not touch or scratch the green drum surface.
— Do not place the drum unit near dust or dirt, or in a high humidity area.
— Do not expose the drum unit to direct sunlight.
●
Do not leave the toner cartridge out of the protection bag for a long time. It will decrease
the toner life.
4
Slide the tab on the toner cartridge
into the slot of the drum unit.
Tab
Slot
5a
Firmly press down on the right side of
the toner cartridge to snap into
position and...
Toner
cartridge
Red arrows
Drum unit
Hold here.
Green drum
surface
2
Remove the toner cartridge and drum
unit from the protection bags.
Peel off the seal from the toner
cartridge (
#
).
Remove the protection bar from the
drum unit (
$
).
Seal
Protection bar
Drum unit
Toner
cartridge
1
2
3
With “Panasonic” face up on the
toner cartridge, match the red arrows
on the cartridge and the drum unit.
1
Before opening the protection bag of
the new toner cartridge, shake it
vertically more than 5 times.
KX-FLB756E (013-021) 03.2.19 4:12 PM Page 16