Features Summary
70
Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 24 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 25 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 27 for details.
Code #04: Printing the sending report
SENDING REPORT
MODE=ERROR
[
±
]
To print and check the sending report for fax
transmission results (page 39).
ERROR (default):
The sending report will be
printed only when fax transmission fails.
ON:
The sending report will be printed out after
every transmission.
OFF:
The sending report will not be printed out.
Code #06: Changing the ring setting in
TAD/FAX mode
TAD RING COUNT
RINGS=2
[
±
]
To change the number of rings before the unit
answers a call in TAD/FAX mode. You can select
from
1
,
2 (default)
,
3
,
4
, “
TOLL SAVER
” and
“
RINGER OFF
”. See page 48 for details.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3
[
±
]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select from
1
,
2
,
3 (default)
and
4
.
Code #10: Changing the incoming message
recording time
RECORDING TIME
MODE=VOX
[
±
]
VOX (default):
Unlimited.
1 MIN:
Up to 1 minute.
Code #11: Setting the remote operation ID
REMOTE TAD ID
ID=111
1.
Press
{
MENU
}
.
2.
Press
{<}
or
{>}
and select this feature.
3.
Enter any 3-digit number except a number
using 0 or 7.
L
The default ID is “
111
”.
4.
Press
{
SET
}
.
5.
Press
{
MENU
}
.
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE
[
±
]
If you cannot dial, change this setting depending
on your telephone line service.
TONE (default):
For tone dial service.
PULSE:
For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
MODE=A
[
±
]
You can select from
A (default)
,
B
and
C
. The
selected ringer pattern will sound during setting.