7.6.3. TROUBLESHOOTING ITEMS TABLE
ITEM
SYMPTOM
REFERENCE
ADF
(Auto Document Feeder)
The document does not feed.
NO DOCUMENT FEED (P.62)
Document jam
DOCUMENT JAM (P.63)
Multiple feed
MULTIPLE FEED (P.64)
Skew
SKEW (P.65)
Recording paper feed
The recording paper does not feed.
THE RECORDING PAPER DOES NOT FEED (P.66)
Paper jam
PAPER JAM (P.67)
Multiple feed and skew
MULTIPLE FEED AND SKEW (P.68)
Printing
The sent fax data is skewed.
THE SENT FAX DATA IS SKEWED (P.68)
The received fax data is skewed.
THE RECEIVED FAX DATA IS SKEWED (P.68)
The received or copied data is expanded.
RECEIVED OR COPIED DATA IS EXPANDED (P.69)
A blank page is copied.
A BLANK PAGE IS COPIED (P.62)
A blank page is received.
A BLANK PAGE IS RECEIVED (P.72)
Black or white vertical line
BLACK OR WHITE VERTICAL LINE (P.72)
Black or white lateral line
BLACK OR WHITE LATERAL LINE ON PRINT OUT (P.73)
An abnormal image is printed
AN ABNORMAL IMAGE IS PRINTED (P.74)
Communication
FAX, TEL
(analog board)
Cannot communicate by fax.
An error code is displayed.
See COMMUNICATION SECTION (P.75)
Cannot talk.
The DTMF tone doesn’t work.
The handset / monitor doesn’t work, etc.
See ANALOG BOARD SECTION (P.105)
Operation panel
Keys are not accepted.
See OPERATION PANEL SECTION (P.111)
Sensor
If the electric circuit is the cause, the error
message corresponding to the sensor will be
displayed.
See SENSOR SECTION (P.112)
7.6.3.1. SIMPLE CHECK LIST
SERIAL NO.
DATE
FUNCTION
JUDGEMENT
REFERENCE
FAX operation
Transmission
OK / NG
Receiving
OK / NG
Copy operation
OK / NG
Telephone operation
Handset transceiver / receiver
OK / NG
MONITOR sound
OK / NG
Ringer sound
OK / NG
Dial operation
OK / NG
Volume operation
OK / NG
VOX detection
OK / NG
Service code #815 (Refer to TEST FUNCTIONS (P.50))
Operation Panel
Key check
OK / NG
Service code #561 (Refer to TEST FUNCTIONS (P.50))
LED check
OK / NG
Service code #557 (Refer to TEST FUNCTIONS (P.50))
LCD check
OK / NG
Service code #558 (Refer to TEST FUNCTIONS (P.50))
Sensor
Sensor check
OK / NG
Service code #815 (Refer to TEST FUNCTIONS (P.50))
Clock
Display changing
OK / NG
Is the time kept correctly?
Check with another clock.
Ext-TAM
Handset transceiver / receiver
OK / NG
Remote control
OK / NG
61
KX-FHD333BR
Содержание KX-FHD333BR
