Panasonic KX-FHD301 Скачать руководство пользователя

Страница: 16 / 50

1.14.4. INSTALLING THE RECORDING PAPER

Letter*, legal** or A4*** size recording paper can be loaded. The unit can hold up to 150 sheets of 75 g/m

(20lb.) paper. You may

use 60 g/m

to 90 g/m

(16 lb. to 24 lb.) paper. Set the recording paper size (code #016 on PROGRAM MODE TABLE (P.65))

according to the paper size you use, after connecting the unit.

*Letter=216 mm × 279 mm (8 1/2” × 11”)

**Legal=216 mm × 356 mm (8 1/2" × 14")

***A4=210 mm × 297 mm (8 1/4" × 11 11/16")

To use A4 size paper, install the A4 paper guides to the paper tray. Refer to INSTALLING THE PAPER TRAY(P.14).

For best results, only use inkjet paper such as Hammermill® Jet Print. If you use other types of paper, the print quality may
be affected.

(1) Fan the stack of paper to prevent a paper jam.

(2) Pull the tension bar forward and hold open while inserting

the paper.

The hight of the stack of the paper should not exceed
the upper limit o the paper tray, otherwise the paper
may jam or multi-feed.

The paper should not be over the tab.

If the paper is not inserted correctly, readjust the paper,
or the paper may jam.

Note for recording paper:

Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for
resumes.

Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.

Avoid extremely smooth or shiny paper that is highly textured.

Avoid paper that is coated, damaged or wrinkled.

Note:

Avoid double-sided printing

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.

Do not reinsert the ejected paper into the recording paper exit.

Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.

Trademarks:

Hammermill® is a registered trademark of INTERNATIONAL PAPER in the United States and/or other countries.

KX-FHD301

Содержание KX-FHD301



















































Результаты поиска

Содержание KX-FHD301

Отзывы:

Похожие инструкции для KX-FHD301

Бренды по названию

Популярные бренды

Panasonic KX-FHD301, Руководство по обслуживанию

Результаты поиска

Содержание KX-FHD301

Отзывы:

Похожие инструкции для KX-FHD301

Бренды по названию

Популярные бренды