67
KX-FC265GR-T
591
FAX auto redial time disconnection
time set
X second
001~999
065
Sets the FAX redial interval during FAX communication.
592
CNG transmit select
1:OFF
2:ALL
3:AUTO
1~3
2
Lets you select the CNG output during FAX transmis-
sion. ALL: CNG is output at phase A. AUTO: CNG id
output only when automatic dialing is performed. OFF:
CNG id not output at phase A. Refer to
593
Time between CED and 300bps
1:75 msec
2:500 msec
3:1 sec
1~3
1
See
Symptom/Countermeasure Table
for long dis-
tance and international calls in
cannot either transmit/receive long distance or
international communications
(P.97). Refer to
594
Overseas DIS detection select
1:detects at
the 1st time
2:detects at
the 2st time
1, 2
1
See
Symptom/Countermeasure Table
for long dis-
tance and international calls in
cannot either transmit/receive long distance or
international communications
(P.97). Refer to
time There is a Transmit Problem
595
Receive error limit value set
1:5 %
2:10 %
3:15 %
4:20%
1~4
2
Refer to
596
Transmit level set
X -1dbm
(10 = -10 dbm)
00~15
10
Selects the FAX transmission level. Refer to
598
Receiving sensitivity
X -1dbm
(40 = -40 dbm)
20~48
44
Used when there is an error problem. Refer to
can copy, but cannot either transmit/receive long
distance or international communications
Power is OFF/ON after changing this set value.
599
ECM frame size
1: 256 byte
2: 64 byte
1, 2
1
----------
710
Memory clear except History data
See
717
Transmit speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1~4
1
Adjusts the speed to start training during FAX transmis-
sion. Refer to
Sometime There is a Transmit Problem
(P.94) and
The unit can copy, but the transmission
and reception image are incorrect
718
Receive speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1~4
1
Adjusts the speed to start training during FAX recep-
tion. Refer to
(P.95) and
can copy, but the transmission and reception image
are incorrect
722
Redial tone detect
1:ON 2:OFF
1, 2
1
Sets the tone detection mode after redialing.
731
CPC mode
X 10 msec
001~255
00
Sets the CPC signal detection mode from the converter.
745
Power ON film feed
1:ON 2:OFF
1, 2
1
When the power is turned on, the film is wound to take
up any slack.
763
CNG detect time for friendly reception 1:10 sec
2:20 sec
3:30 sec
1~3
3
Selects the CNG detection tone of friendly reception.
773
DIS-DIC interval
1: 500msec
2: 200msec
1, 2
2
This is similar to #594. The time interval from receiving
DIS to sending DCS can be changed to wait for the
echo canceler to recover.
774
T4 timer
X 100 msec
00~99
0
Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
784
Voice prompt test
You can hear the voice prompt from speaker after
pressing “SET” key.
815
Sensor check
See
852
Print test pattern
See
853
TOP MARGIN
X mm
1~9
5
----------
861
Paper size
1:A4
2:Letter
1,2
1
----------
874
DTMF ON time
X 10 msec
006~020
10
----------
875
DTMF OFF time
X 10 msec
006~020
10
----------
880
History list
See
881
Journal 2 list
See
882
Journal 3 list
See
961
The time transmitting the false ring
back tone
X sec
01~10
07
Set the time transmitting the false ring back tone to the
line in TEL/FAX mode.
Code
Function
Set Value
Effective
Range
Default
Remarks
Содержание KX-FC265GR-T
