2. Installation
19
Cordless Handset
2.5 Battery installation /
replacement
2.5.1 Installing the batteries
1
Insert the batteries negative (
−
) terminal first.
2
Close the battery cover.
2.5.2 Replacing the batteries
If
7
flashes even when the batteries have
been fully charged, both batteries must be
replaced.
Please use only Panasonic
batteries.
See page 9 for accessory information.
Important:
L
Charge the new batteries for about 7
hours before initial use.
L
When replacing the batteries, ensure that
the correct battery type is selected (page
75) even if you install the same type of
batteries.
L
Use only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
L
Do not mix old and new batteries.
1
Press the notch on the cover firmly and slide
it in the direction of the arrow.
2
Remove the batteries positive (
+
) terminal
first. Replace both batteries. See the battery
installation procedure.
FC243FX-PFQX2104ZA_en.book Page 19 Tuesday, November 2, 2004 2:10 PM
Содержание KX-FC243FX
Страница 62: ...8 Answering Machine 60 Note L You can also program this feature with the base unit feature 67 on page 67 ...
Страница 112: ...110 ...
Страница 113: ...111 ...