70
A
C
B
Adjusting the feeder pressure
No feeding or multiple feeding occurs frequently, adjust the feeder pressure.
1
Open the front lid by pressing the front lid open
button.
2
Shift the position of the lever by using an
instrument with a pointed end, like a clip or ball-
point pen.
Position A: Select this when documents do not
feed.
Position B: Standard position (pre-selected)
Position C: Select this when documents multiple
feed.
3
Close the front lid by gently pressing down on both
ends.
Lever
Front lid open
button
1
Set the handset switch to NO HANDSET (see
page 60).
2
Pull the hooks to the right in the order as shown,
while lifting up the handset cradle.
3
Disconnect and connect the power cord again.
1
2
Removing the handset cradle
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Caution:
¡
If the handset and handset cradle have been
removed when you connect the power cord, an
alarm will sound and the following message will
be displayed.
¡
Set the handset switch to NO HANDSET (see
page 60).
CHECK CRADLE
Hooks