2
3
4
5
6
7
8
9
0
1
32
Storing phone numbers for automatic dialing
The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch dialing: The unit is equipped with 5 direct call station keys, each of which is divided into an upper
station and a lower station.
Speed dialing:
The unit is equipped with 50 additional dialing stations. These stations are assigned to
2-digit numbers (00 – 49).
1
Press
(MENU)
until the following message is
displayed.
2
a: Programming for one-touch dialing:
For upper stations (1–5)
Press one of the direct call station keys.
For lower stations (6–10)
Press
(LOWER)
, then press one of the direct
call station keys.
b: Programming for speed dialing:
Press
K
, then press the desired 2-digit number
(00–49).
3
Enter the phone number up to 30 digits in length.
¡
To enter a hyphen in a phone number, press
(LOWER)
.
4
Press
(START/COPY/SET)
.
5
Enter the station name, up to 10 characters, by
following the instructions on page 13.
6
Press
(START/COPY/SET)
.
¡
To program other stations, repeat steps 2 to 6.
7
Press
(STOP)
.
NAME=
STORE TEL NO.
To keep whole or part of the
phone number secret
Press
(SECRET)
(direct call station 3) before and
after the number you wish to keep secret.
¡
The phone number will not appear on the display
and on the telephone number list.
¡
Pressing
(SECRET)
once counts as two digits.
To erase a stored number and
station name
Press
(STOP)
in step 3 to clear the phone number.
Press
(DELETE)
(direct call station 5) repeatedly
in step 5 until all of the characters are erased.
Then, press
(START/COPY/SET)
.
Helpful hint:
¡
To confirm stored phone numbers and station names, print a telephone number list (see page 62).
(MENU)
(LOWER)
(HYPHEN)
(STOP)
(START/COPY/SET)
Speed dial
stations
Direct call stations
(DELETE)
(SECRET)
