Panasonic KW2M-A Скачать руководство пользователя страница 90

Страница: 90 / 93

Specifications

KW2M-A/X User's Manual

11.7 Self-diagnostics and troubleshooting

When an error occurs, an error code will be displayed. Refer to the list of error codes in the table to find
out what to do.

Error code

Error description

Action to take

W0001

DHCP server access error

Connect to the DHCP server.

W0002

Illegal IP address has been obtained by
the DHCP server

Check the DHCP server.

W0003

IP address

duplication

Change the IP address.

W0013

Web server is in lock out due to an
authentication failure

Wait 10 minutes and try again.

E0042

No expansion units found

Turn off power and connect the expansion
units

E0049

Hardware error

Turn the power off and on again.
When the device does not recover, change
the main unit as it may have reached the
end of its service life.

E0091

Internal memory error 1

Turn the power off and on again.
When the device does not recover, change
the main unit as it may have reached the
end of its service life.

E0092

Internal memory error 2

Turn the power off and on again.
When the device does not recover, change
the main unit as it may have reached the
end of its service life.

Содержание KW2M-A






























































































Результаты поиска

Содержание KW2M-A

Отзывы:

Panasonic KW2M-A, Руководство пользователя, Страница: 90 / 93

Результаты поиска

Содержание KW2M-A

Отзывы: