6.4 Scanning Documents
1.
Load the documents.
•
When using the ADF, refer to "6.2.2 Loading documents on the ADF" (page 28).
•
When using the flatbed, refer to "6.3.2 Loading documents on the flatbed" (page 35).
2.
Open your scanning application and scan the documents.
•
For details about the application, refer to the help of each application.
•
You can also start up applications automatically to scan documents (push scan). For details about
push scan settings, see "6.5 Using Push Scan" (page 45).
•
Remove documents after they have been scanned.
Notes for scanning with the carrier sheet
•
If the rollers are dirty, the scanned image will be stretched or distorted. In such cases, clean the rollers.
•
If vertical streaks appear on the scanned image, clean the ADF glasses and the carrier sheet. Vertical
streaks that appear may be caused by scratches on the carrier sheet. If vertical streaks appear after
cleaning the ADF glasses and the carrier sheet, flip over the carrier sheet to the other side, or replace the
carrier sheet, and then scan the documents.
6.4.1 Switching the Background Color of Scanned Images
The background color of the scanned images can be switched between white and black.
How to switch the ADF in order to change the background color:
Using the software, you can switch the background color.
For details, refer to the Image Capture Plus, TWAIN, or ISIS help.
How to switch the flatbed in order to change the background color:
1.
Open the document cover (page 21).
2.
Slightly lift the top of the flatbed sheet ( ) to unhook it from the document cover, and then remove the
flatbed sheet ( ).
1
1
2
6.4 Scanning Documents
36
