Changing the Reference Plate Setting
31
5
Close the exit door slowly until it clicks
into place.
■
Flatbed sheet setting
1
Turn off the scanner.
2
Fold the hopper tray in the direction of
the arrow (
).
3
Open the document cover (
) and
remove the flatbed sheet from the
flatbed cover (
).
•
The flatbed sheet is attached to the docu-
ment cover with magnets.
4
Turn the flatbed sheet over, and then
place it in the upper left corner of the
flatbed glass.
•
Place the flatbed sheet to the left.
5
Close the document cover.
•
When you close the document cover,
close it securely until it is locked.
The flatbed sheet will become magneti-
cally attached to the document cover.
Hopper tray
Document cover
Flatbed sheet
1
2
3
Flatbed sheet
Standard mark
