18
How to Care
Be sure to power off main unit before cleaning.
■
Main unit (Excluding the charging terminal)
p
p
When this product gets dirty, clean with a dry soft cloth.
p
p
When the dirt is hard to remove, wipe the product gently with a twisted wet cloth, and
then with a dry soft cloth.
p
p
Do not use materials such as thinner, benzene, wax, oil, soap foam, abrasive detergent,
hot water, and a chemical cloth.
■
Scanner
p
p
When a dust or sebum is staying on the surface of barcode scanner, scan is not
performed or scan height may be shorter.
When this product gets dirty, clean with a dry soft cloth.
When the dirt is hard to remove, wipe the product gently with twisted wet cloth, and then
with a dry soft cloth. (Approximately once a month is recommended.)
p
p
Wipe the barcode scanner vertically as shown in the illustration.
■
Charging terminal
p
p
When a dust or sebum is staying on the terminal, charging may be impossible.
When it becomes dirty, clean it using a dry soft cloth according to the dirtiness.
(Recommended to clean once a month.)
Be also careful not to bend the terminal.
JT-H320HT-E1_E2(PGQX1034ZA).indd 18
2011/08/29 18:21:19