Panasonic HYBRID IP-PBX KX-TDA100, Руководство по программированию

Страница: 82 / 912

2.6.14 Utility—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be set to
INS status.
The displayed items are as follows:
Item Description
Shelf-Slot Number of the slot (for KX-TDA600, shelf and slot)
Port Number of the port
CS Name Name of the attached CS
Status Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version Version number of the program file stored in the CS
Revision Revision number of the program file stored in the CS
CSID 12-digit ID number of the CS
Path Number of the wireless extension currently using each path. In the case
of a group, several extensions may be using the same floating extension
number.
When an extension number is not registered, the display shows "OFF".
2.4 GHz PSs can use up to 3 paths (KX-TDA100/KX-TDA200/
KX-TDA600) or 2 paths (KX-TDA30). DECT PSs can use up to 4 paths
(KX-TDA100/KX-TDA200/KX-TDA600) or 2 paths (KX-TDA30). When
using high-density CSs, DECT PSs can use up to 8 paths.
Group Call Number of PSs registered to the attached CS that are members of a PS
Ring Group.
To view CS information
1.
From the Utility menu, select CS Information .
2.
From the Target CSI/F Slot No drop-down list, select the target slot.
•
To display information on a single card, select the slot number and name of that card.
•
To display information on all matching cards, select "ALL".
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4.
Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click
Refresh .
5.
Click Stop to end monitoring.
6.
Select an option:
•
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Start .
•
Click Close to return to the main screen.
82 PC Programming Manual
2.6.14 Utility—CS Information