VQT4F16
33
(When [DISP] is selected)
Select the year/month/day display method using the
SET button.
4
Press the SET button.
5
Select [SET DATE AND TIME] using the SET button
and then press the SET button.
≥
To return to the recording screen or playback screen, press the MENU
button.
≥
At the time of purchase, the [CLOCK SET] are not set.
≥
If the date and time have not been set or the built-in clock battery has
run down, the screen display and recording day/month/year
information will appear as follows.
Recording screen display: --.--.---- -:--
Recording day/month/year: 01.01.2012 0:00
≥
To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery in for approximately 2 days, the time
settings will be stored for approximately 7 days. (The charging
continues even when the unit is turned off)
≥
[Before using the unit under water] and [Maintenance after use in
water] are displayed when setting date and time for the first time after
purchase. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
For Australia and New Zealand
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED
BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT
THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR
YOUR NEAREST AUTHORIZED SERVICE CENTRE.
Simplified-HX-WA2EG-VQT4F16_mst.book 33 ページ ２０１２年２月６日 月曜日 午後４時１０分
