Answering System Features
45
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
Press
{
Call
}
during playback.
Note:
L
To edit the number before calling back,
press
{
Edit
}
and edit the number
(page 27). Then press
{
Call
}
,
{C}
, or
{s}
.
Memory capacity
The total recording capacity (including
your greeting message and caller
messages) is about 15 minutes. A
maximum of 64 messages (including a
greeting message) can be recorded.
L
If message memory becomes full:
– “
E
” flashes on the base unit.
– the ANSWER ON indicator flashes
rapidly (if the answering system is
turned on).
– the unit announces “
Memory full
”
when operating the answering
system.
To record additional messages, erase
unnecessary messages.
L
If less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time when
operating the answering system.
L
Messages are retained even if a power
failure occurs. All messages are saved
until you erase them.
(Flash memory
message backup)
L
The total recording capacity may be
reduced by the calling party’s
background noise.
