Battery charging
for cameras
R
This camera has an internal
rechargeable battery.
R
Turn the camera off before
charging the battery. If the
camera is turned on while
charging, it may take longer to
charge.
R
Make sure to charge the battery
indoors and in a dry location.
R
Charge the battery in a location
with a temperature between
5°C and 40°C (41°F and
104°F). The battery cannot
charge in locations outside of
these temperatures.
1
Open the micro-USB jack
cover (
A
).
2
Insert the USB cable (
B
) into
the micro-USB connector.
1
2
1
1
5.0 V, 1.0 A or higher power
source
Turning the power
on for cameras
Open the cover on the rear of the
cameras, and then slide the power
switch to ON.
Registering the
camera
This procedure is not required
for devices that were included
as part of a bundle.
Before you can use the camera, it
must be registered to the access
point.
If the camera is not registered to
an access point, the camera’s
LED indicator blinks in amber.
You can register each camera by
using the registration buttons or
the
[HomeHawk]
app.
Note:
R
Before registering the camera,
make sure the AC adaptors of
the access point and camera
are connected and each device
is powered.
12
For assistance, please visit http://shop.panasonic.com/support
Setup
HNC710̲(en̲en)̲1227̲ver.010.pdf 12
2017/12/27 15:55:02
