Panasonic HL-G1-A-C5 Series, Руководство пользователя

Страница: 123 / 158

4-4
Setting Address List
In the case of connecting the sensor to our Programmable Logic Controller (PLC) or
Programmable Display (GT Series), data can be exchanged by using data area
write/read commands over MEWTOCOL-COM communications.
Our FP-series PLC is provided with data write (F145: Data send) and data read (F146:
Data receive) commands. Programming is possible with ease without being aware of
the command format of the NEWTOCOL-COM Communications if these commands
are used.
For details, refer to the FP series Programming Manual.
In case using without protecting the following, the sensor may be operated
unexpectedly. Thus, be sure to protect followings.
In case the unexpected operation is occurred, turn OFF the power and start up
for initialization.
・
Do not write and read an address not listed.
・
Do not write to an unwritable adress (NG in the list.)
・
Do not write in a value other than specified data range to each adress.
[MEWTOCOL-COM Communications]
When the sensor receives a command from the PLC or GT Series, the sensor will
transmit a response to the command. The PLC and GT Series can exchange data
with the sensor in the NEWTOCOL-COM communications procedure.
* NEWTOCOL-COM is a communications protocol developed for our FP-series
PLC.
Ramco National 800-280-6933 | nsales@ramcoi.com www.panasonicsensors.com