12
Start/Cancel Function
1. For every function, press
for approximate 3 seconds to start operating the
function.
2. To cancel the function, press
and
simultaneously for approximately
3 seconds.
Reminder Function
This function helps to remind about the cook time has completed for the next action.
In standby mode,
1. Press for approximate 3 seconds to start cooking.
will be visible on the
display, indicating the heating is in progress.
(Be sure that cooking function and temperature setting knobs have been rotated as
desired requirements.)
2. Press once, will be visible fl ashing on the display.
3. Press or
to adjust the hour setting. (Hour should be within 0 - 23.)
4. Press , the minutes will fl ash.
5. Press or
to adjust the minutes setting. (Minute should be within 0 - 59.)
6. Press to fi nish the Reminder settings. Current time and will be visible on the
display.
■
Note:
• Press
once to see the countdown of the Reminder.
• The buzzer will beep when the Reminder reaches
. will fl ash. Press any
button to stop the buzzer and will go off.
• The heating will continue until the operation is cancelled or the oven will enter standby
mode after a total of 10 hours.
Delay Function/End Function
Only when the current time has been set, Delay Function/End Function can be used
for either of 2 reasons below:
1
To delay start of cooking function, by setting the end time of cooking. The cooking
duration time is also set, so that the cooking starts automatically to end at the time
pre-programmed.
2
To start cooking immediately, but set the end cooking time to shut down the oven
automatically when the cooking is completed.
Using the Oven
