General Installation Manual
© Feb 2012, SANYO Electric Co., Ltd. All Rights Reserved
9
Figure 3.6
Grounding method
Using Grounding Clip with
self-tapping screw
Note: Use the smaller ground
holes illustrated in Figure
3.1.
Grounding Clip Assemblies:
Tyco Electronics 1954381-1.
Figure 3.7
Grounding method
Using Grounding Clip with
bolt and nut
Note: Use the larger ground
holes illustrated in Figure
3.1.
Grounding Clip Assemblies:
Tyco Electronics 1954381-2
Glass
Backsheet
Frame (Longer side)
Grounding hole
(0.205” diameter (5.2mm))
Grounding Clip
8-32 Screw (Stainless steel)
Nut (Stainless steel)
Copper wire
Length
(not less than 0.63’‘(16 mm)
not more than 0.78’‘(20 mm))
Copper wire
Frame (Longer side)
Glass
Backsheet
Grounding hole
(0.165” diameter (4.2mm))
Grounding Clip
Self-tapping screw (Stainless steel)
Length
(not less than 0.47’‘(12 mm)
not more than 0.78’‘(20 mm))
