background image

79

4

Chapter 4  Adjustments and settings for recording

(continued)

Loading lens files from the SD memory
card

< LENS FILE CARD R/W >

n

CARD FILE SELECT :1

READ
WRITE

TITLE READ

TITLE:

1:

5:

2:

6:

3:

7:

4:

8:

Now perform steps 

5

through 

8

on page 77.

<Note>

The card file titles on the SD memory card are displayed on
the LENS FILE (CARD R/W) screen, but the titles of the
lens files contained in the card files are not shown on this
screen.
To display these titles, load the files, and check the titles on
the LENS FILE screen.
The lens files in the unit’s internal memory will be rewritten
as the loaded lens files at this time.  For this reason, save
the lens files in the internal memory onto the SD memory
card first to back them up before loading them on the SD
memory card.

4

Press the JOG dial button to enter the file number.

1

Using menu operations, open the <LENS FILE CARD
R/W> screen from the FILE page.

2

Turn the JOG dial button to move the arrow (cursor) to
the CARD FILE SELECT item

3

Press the JOG dial button and the card file number will
flash. Turn the JOG dial button to select the file (1 to 8)
to be read.

01.AJ-HDX900̲P̲E(VQT0X86-1)̲E  06.10.19  3:34 PM  ページ79

Downloaded From CamcorderManual.com Panasonic Manuals

Содержание HDX900







































































































































Отзывы: