Panasonic HDC-TM55EB, Руководство по обслуживанию

Страница: 20 / 68

20
7 Service Fixture & Tools
7.1. When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
7.2. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the capacitor on FLASH P.C.B..
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B..
No. Parts No. Connection Form
1 VFK1933 PP6003(MAIN) - PS6701(POWER FPC) 34PIN 0.5 B to B
2 RFKZ0448 FP6008(MAIN) - LENS UNIT 33PIN 0.3 FPC
3 VFK1933 PP6004(MAIN) - MONITOR FPC 34PIN 0.5 B to B
4 RFKZ0343 PP6002(MAIN) - PS7001(FLASH) 30PIN 0.5 B to B
5 RFKZ0379 PS6002(MAIN) - PP6401(SD) 40PIN 0.5 B to B
6 VFK1480 FP6001(MAIN) - FP6501(SIDE (R) OP) 6PIN 0.5 FFC
7 VFK1286 FP7001(FLASH) - FRONT CASE UNIT 16PIN 0.5 FFC