Panasonic HDC-SD600EB, Руководство по обслуживанию

Страница: 19 / 74

19
7 Service Fixture & Tools
7.1. When Replacing the Main P.C.B.
After replacing the Main P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
7.2. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the capacitor on Flash P.C.B..
Refer to “How to Discharge the Capacitor on Flash P.C.B.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on Flash P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on Flash P.C.B..
No. Parts No. Connection Form
1 RFKZ0444 PP6005( Main ) - PS601( Batt. Catcher ) 50PIN 0.5 B to B
2 VFK2020 PS6002( Main ) - FP4802( MIC AMP ) 20PIN 0.5 B to B
3 VFK1933 PS6003( Main ) - Monitor FPC 34PIN 0.5 B to B
4 VFK1950 FP6001( Main ) - FP6403( Front ) 33PIN 0.3 FPC
5 VFK1870 PP6006( Main ) - PS7001( Flash ) 30PIN 0.5 B to B
6 RFKZ0416 FP6002( Main ) - Lens Unit 41PIN 0.3 FPC