71
VQT1H62
Editing
≥
To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (
l
below)
≥
Scenes which cannot be played back (the
thumbnails are displayed as
) cannot be
deleted.
≥
Protected scenes cannot be deleted.
≥
Do not open the SD card/battery cover while
deleting. The deletion will stop.
≥
In case of [ALL SCENES], the deletion may
take time if there are many scenes on the SD
card.
≥
Do not turn off this unit while deleting.
≥
When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥
If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.
To delete an unnecessary portion of a scene, first
divide the scene and then delete the
unnecessary portion.
¬
Rotate the mode dial to select
and then select the [
] (motion
picture playback) tab.
1
Press the MENU button, then
select [EDIT SCENE]
#
[DIVIDE]
#
[SET] and press the cursor
button.
2
Select the scene to be divided,
then press the cursor button.
The selected scene is played back.
3
When you reach the area where
you want to divide the scene,
press the cursor button down to
set the dividing point.
≥
Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (
l
65, 66)
4
When the confirmation message
appears, select [YES], then press
the cursor button.
5
Delete the unnecessary scene.
Refer to page 70 for how to delete scenes.
To continue dividing other scenes
Repeat steps 2-4.
To complete editing
Press the MENU button.
To delete all the divided points
Press the MENU button, then select
[EDIT SCENE]
#
[DIVIDE]
#
[CANCEL ALL]
and press the cursor button.
≥
When the confirmation message appears,
select [YES], then press the cursor button.
≥
All divided points set on this unit will be
canceled.
≥
The scenes that were deleted after division
cannot be recovered.
≥
Scenes cannot be divided if the number of
scenes has reached 999.
≥
It may not be possible to divide scenes with a
short recording time.
≥
If images that have been divided are played
back on another device, the points where the
scenes join may not be clear.
≥
Data that has been recorded on another device
cannot be divided.
≥
Data that has been recorded or edited on
another device cannot be divided and the
divided points cannot be deleted.
Dividing a scene to delete
This is for dividing a scene into two to
delete an unnecessary portion.
VQT1H62_ENG_PP.book 71 ページ ２００７年７月１７日 火曜日 午後５時４４分
