41
VQT2D01
This unit will resume recording pause mode about
0.6 seconds after the LCD monitor is reopened.
≥
When in Quick Start Standby mode about 70%
of the power used in Recording Pause mode
is being consumed, so the recording time will
be reduced.
≥
Start time will not shorten if there is no SD card
inserted.
Start time will be shorten if the [Built-in
Memory] is selected in the [MEDIA SELECT],
even if there is no SD card inserted.
¬
Change the mode to
.
1
Select the menu. (
l
29)
2
Close the LCD monitor while the
mode is set to
.
The status indicator
A
flashes green and the unit
goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is
put into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
with the LCD monitor
closed.
≥
Time for Quick Start will be more than 0.6
seconds slower when the digital cinema is used.
≥
It may take some time for Automatic White
Balance to adjust.
≥
In the Quick start mode, the zoom
magnification becomes 1
k
.
≥
If [ECONOMY] (
l
31) is set to [5 MINUTES]
and the unit automatically goes into Quick Start
Standby Mode, close the LCD monitor and
then open it again.
≥
Turn the unit off using the power button.
When the power is turned on with the mode set
to
, the unit will enter the recording pause
mode after about 1.9 seconds.
¬
Change the mode to
.
Select the menu. (
l
29)
≥
This function’s default setting is [ON].
≥
In the Quick power on mode, the zoom
magnification becomes 1
k
.
Quick start
[SETUP]
#
[QUICK START]
#
[ON]
Quick power on
[SETUP]
#
[QUICK POWER ON]
#
[ON]
HDCSD10&TM10PP-VQT2D01_eng.book 41 ページ ２００９年５月１８日 月曜日 午前９時３６分
