42
VQT1Y31
Auto focus
The lens is moved forward or backward
automatically to bring the subject into focus.
Auto focus has the following characteristics.
j
Adjusts so that the vertical lines of a subject
are seen more clearly.
j
Attempts to bring an object with higher
contrast into focus.
Auto focus does not work correctly in the
following situations. Record pictures in the
Manual Focus Mode.
j
Recording distant and close-up objects at the
same time
j
Recording a subject behind a dirty or dusty
window
j
Recording a subject that is surrounded by
objects with glossy surfaces or by highly
reflective objects
j
Recording a subject in dark surroundings
j
Recording a fast-moving subject
j
Recording a subject with little contrast
This unit will resume recording pause mode
about 0.6 seconds after the LCD monitor is
reopened.
≥
When in Quick Start Standby Mode about
70% of the power used in Recording Pause
mode is being consumed, so the recording
time will be reduced.
¬
Change the mode to
or .
1
Select the menu. (
l
28)
2
Close the LCD monitor while the
mode is set to
or
.
The status indicator
A
flashes green and the unit
goes into Quick Start Standby Mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is
put into recording pause.
Quick start
[SETUP]
#
[QUICK START]
#
[ON]
HDCHS250P-VQT1Y31_eng.book 42 ページ ２００９年１月２０日 火曜日 午前１１時１８分
