25
VQT1Y31
Caution:
When the SD card is removed while the access lamp is lit, this unit may malfunction or the data
recorded on the SD card may be lost.
1
Open the LCD monitor.
≥
Check that the access lamp has gone off.
2
Open the SD card cover by
sliding the OPEN lever
B
.
3
Insert/remove the SD card.
≥
Face the label side
C
in the direction shown in
the illustration and press it straight in as far as
it will go.
≥
Press the center of the SD card and then pull it
straight out.
4
Securely close the SD card cover.
≥
Securely close it until it clicks.
≥
Do not touch the terminals on the back of the SD card.
≥
Do not apply strong shocks, bend, or drop the SD card.
≥
Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the
data stored on the SD card.
≥
When the card access lamp is lit, do not:
j
Remove the SD card
j
Turn the unit off
j
Insert and remove the USB cable
j
Expose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/SD card or this unit.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (
l
92) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc
etc. before proceeding with the formatting. (
l
100, 111)
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD card, the
access lamp lights up.
HDCHS250P-VQT1Y31_eng.book 25 ページ ２００９年１月２０日 火曜日 午前１１時１８分
