- 139 -
∫
Checking on the baby in your house
You can check the image of the baby being monitored on your smartphone.
≥
Images of baby-monitoring cannot be recorded.
≥
It cannot be confirmed with multiple smartphones simultaneously.
∫
Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
≥
A voice message of up to 1 minute can be sent.
≥
Open the LCD monitor of this unit when using the Voice message function.
∫
Sending notifications to your smartphone
This unit sends a notification to the smartphone in the following situations:
≥
When baby monitoring starts
≥
When a sound is detected
∫
Sound detection
When this unit detects a sound, it can automatically send a notification to the connected
smartphone.
≥
This function can be used only if this unit is connected to the Internet via the wireless access
point when [Baby Monitor] is used.
≥
Depending on [Sound Detection Sensitivity] setting and recording conditions, sounds may not be
detected. Test the sound detection function in advance to check if sounds can be detected and
notified.
Touch [Setup] on the screen of this unit, and select the item you want to set.
∫
[Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
∫
[Notification Test]
This tests if a notification can be sent to the smartphone when a sound is detected.
∫
[Remote Voice Level]
This sets the voice message volume.
∫
[Sound Detection Sensitivity]
This sets the sound detection sensitivity.
What you can do with [Baby Monitor]
Changing [Baby Monitor] settings
[ON]/[OFF]
(Volume high)/
(Volume low)
[High]/[Low]