71
VQT1Y00
Self-timer
This is for recording still pictures using the timer.
≥
Change the mode to
.
Select the menu. (
l
34)
[PICTURE]
#
[SELF TIMER]
#
[10 SECONDS] or [2 SECONDS]
[10 SECONDS]: Records after 10 seconds
[2 SECONDS]: Records after 2 seconds
≥
When the
button is pressed, a still picture is recorded after
the
Ø
10 or
Ø
2 display and the recording lamp flashes for the
time which has been set.
≥
After recording, the self-timer is canceled.
≥
In Auto focus mode, if the
button is pressed halfway once
and then fully, the lens focuses on the subject when the
button is
pressed halfway.
≥
If the
button is pressed fully all at once, the lens focuses on
the subject just before recording.
To stop the timer midway through
Press the MENU button.
Built-in flash
When the
button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
≥
Change the mode to
.
Select the menu. (
l
34)
[PICTURE]
#
[FLASH]
#
[AUTO] or [ON]
≥
This function’s default setting is [AUTO].
≥
When the
button is pressed halfway, the flash indicator will
appear in the bottom left corner of the screen.
[ON]:
ß
[AUTO]:
ß
A
[OFF]:
≥
The unit automatically determines if the flash is necessary even
when it has been set to [OFF] by detecting the ambient
brightness. (If it determines that the flash is necessary, the
indication lights up in red when the
button is pressed
halfway.)
∫
To adjust the brightness of the flash
≥
The Intelligent auto mode is set to off. (
l
46)
Select the menu. (
l
34)
[PICTURE]
#
[FLASH LEVEL]
#
desired setting
[
ß
j
]:
Less bright
[
ß
d
0]: Normal
[
ß
i
]:
Much brighter
Function
Effect/Setting method
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 71 ページ ２００８年１２月２２日 月曜日 午後８時１６分
