file:///C|/U
...l/Temp/Rar$EXa0.980/viewing/SGML_VIEW_DATA/ALL/H-PS45175PP/SVC/DSC1109054CE/doc/DSC1109054CE_05.xml[11/12/2018 4:04:07 PM]
Important:
1.
When removing the 1st lens frame unit, it has to be proceed inside of satisfed clean level.
(Less than class 10,000 (Federal Standard 209D))
As for clean box, refer to the "3.2. Clean Box", in details.
2.
When tighten the screws, use torque driver (RFKZ0456) with specifed torque.
3.
To keep the Lens performance, use only the 1st lens frame unit which was ftted as it was.
Therefore, the 1st lens frame unit is not supplied as spare parts.
Also do not exchange the 1st lens unit taking from others.
5.2.1 Disassembly procedure
Important:
It must be performed inside of satisfed clean level.
(Satisfed clean level: Less than class 10,000 (Federal Standard 209D))
(1) DECO.RING
1. Decoration ring is sticked on the 1st lens frame unit.
2. Put the sheet so that the lens glass is fully covered.
3. Insert the needle to Gap (A) (between the decoration ring and lens glass), and peel off the decoration ring gently.
(2)FILTER RING UNIT
Remove the following 3 screws, then remove FILTER RING UNIT.
(B215 - B217: Silver 5mm)
