background image

3

Safety precautions

Safety precautions

 indicates safety information.

  1) Read these instructions.

  2) Keep these instructions.

  3) Heed all warnings.

  4) Follow all instructions.

  5) Do not use this apparatus near water.

  6) Clean only with dry cloth.

  7)  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

 

apparatus (including amplifiers) that produce heat.

  8)  Protect the power cord form being walked on or  

pinched particularly at plugs, convenience 
receptacles, and the point where they exit from  
the apparatus.

  9)  Only use attachments/accessories specified by  

the manufacturer.

  10)  Use only with the tripod or table specified by the 

manufacturer.

  11)  Unplug this apparatus during lightning storms or 

when unused for long periods of time.

  12)  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has 
been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or  
objects  have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these operating instructions handy for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Declaration of Conformity

with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances  

in Electrical and Electronic Equipment

(adopted by Order 

1057 of Cabinet of Ministers of Ukraine)

The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous 
Substances in electrical and electronic equipment (TR on RoHS).

The content of hazardous substance with the exemption of the applications listed in the Annex 

2  of TR on RoHS:

1.  Lead (Pb) – not over 0,1wt % or 1000wt ppm;
2.  Cadmium (Cd) – not over 0,01wt % or 100wt ppm;
3.  Mercury (Hg) – not over 0,1wt % or 1000wt ppm;
4.  Hexavalent chromium (Cr

6+

) – not over 0,1wt % or 1000wt ppm;

5.  Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;
6.  Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.

Содержание GP-VD131



























Отзывы: