background image

21

Troubleshooting

p

q

Video

Symptom

Cause and remedial action

Reference pages

No pictures are 
displayed or the 
pictures are disturbed

p

p

Has the unit been connected properly to the HD Visual 
Communication Unit?

P.16

p

p

Has the camera been selected correctly from the HD Visual 
Communication Unit?

Operating instructions 

of the HD Visual 

Communication Unit

p

p

Are all the service switches at the OFF position?

P.14

No auto focusing

p

p

Is the focus set to manual?

   

 Auto focusing is initiated as soon as the focus is set to auto.

Operating instructions 

of the HD Visual 

Communication Unit

p

p

In some situations, it may be hard to focus at the auto setting.

   

 Select the manual setting, and focus manually.

Operating instructions 

of the HD Visual 

Communication Unit

The subject is not 
brought into focus 
during zooming when 
the manual setting is 
used for the focus

p

p

Was the focus adjusted at the Tele end?

   

  First adjust the focus at the Tele end where the focusing accuracy 

is higher, and then proceed with the zooming.

Operating instructions 

of the HD Visual 

Communication Unit

p

p

Under some operating conditions, it may be hard to bring 
subjects into focus.

   

 Use the focus at the auto setting.

Operating instructions 

of the HD Visual 

Communication Unit

Something is wrong 
with the colouring of 
the pictures

p

p

Activate the automatic white balance setting (auto tracking 
white adjustment) function.

Operating instructions 

of the HD Visual 

Communication Unit

p

p

In some situations, the proper colours may not be reproduced 
using the automatic white balance setting function.

   

 Adjust the white balance manually.

Operating instructions 

of the HD Visual 

Communication Unit

Содержание GP-VD130CH


























Отзывы: