Panasonic GP-VD130CH, Руководство по эксплуатации

Страница: 17 / 25

17
Connections
p 
Installation precautions for the IR system cable
p p
Place the HD Visual Communication Unit behind the doors of a system rack, for example, to ensure that the signals of the
remote controller will not be received directly. If these signals are received directly, they will interfere with the signals of the IR
system cable, and the operations concerned will not be performed properly.
p p
Turn on the power of the camera if remote control operations using the IR repeater function are to be performed. If the
camera’s power is not on, it will not be possible to perform remote control operations using the IR repeater function.
p 
Checking the operations performed when the IR system cable is
installed
Step 1
With the IR system cable not connected to the camera, perform one or more remote control operations, and check that the
HD Visual Communication Unit does not operate in response. (Check that the signals of the remote controller are not being
received directly.) If the HD Visual Communication Unit does operate, select another installation location.
This unit
Leave this end of the cable
disconnected.
p p
The figure does not show the HDMI cable.
HD Visual Communication Unit
HD Visual Communication Unit operations
Camera operations
Check that the signals are not
received directly.
IR system cable
Step 2
With the IR system cable now connected to the camera, perform one or more remote control operations, and check that the HD
Visual Communication Unit operates properly in response.
This unit
Connect this end of the cable.
p p
The figure does not show the HDMI cable.
HD Visual Communication Unit
HD Visual Communication Unit operations
Camera operations
Check that operations
can be performed.
IR system cable