manualshive.com logo in svg

Panasonic GM1 Series, Руководство пользователя

Поделиться
Скачать
Panasonic GM1 Series Скачать руководство пользователя страница 425

Setting item

Description

Implementation

[Recommended]

● Check that "Din66025" has been selected.
● If "Table" has been selected, change to "Din66025".

Compile mode

[Recommended]

● Check that "SMC_CNC_REF" has been selected.
● If "SMC_Outqueue" or "File" has been selected, change to "SMC_CNC_REF".

File name

[Not supported]
Leave the default value unchanged. This item is not used.

Queue size

Default values

Specify default values for velocity, acceleration, and deceleration during interpolation
control operation. Unless velocity, acceleration, and deceleration are specified using
G-code, interpolation control will be performed using these default values.

Default values for fast
forward (G0)

[Not supported]
Do not change the default value.

3D-Mode

[Not supported]
Do not change the default value.

Start position

For the SMC_OUTQUEUE type, specify the coordinates from which interpolation
control is to be started. Because the GM1 controller has the starting position controlled
within function blocks, do not change the default values in this area.

11.5.5 Overview of G-code

In the GM1 controller, G-code is used to set operation patterns for interpolation control.
G-code is a coding system used for machine NC programming. The GM1 controller complies

with the "Din66025" standards.
For details on operations executed by each G-code, refer to 

"11.5.7 Movements Executed by

Each G-code and Setting Methods"

.

The GM1 controller supports the following G-codes.

G-
code

Function

Description

Remarks

G1

Linear interpolation

Executes linear interpolation

G2

Circular interpolation
(clockwise)

Executes circular interpolation
(clockwise)

End point: X, Y, Z
Center point: I (X), J (Y), K (Z)
Radius: R

G3

Circular interpolation
(counterclockwise)

Executes circular interpolation
(counterclockwise)

G4

Dwell time

Sets a time to wait until next
movement is started

Specified time: seconds

G17

Plane specification (X / Y)

Specifies the plane in which circular
interpolation is performed, as XY-
plane

G18

Plane specification (X/ Z)

Specifies the plane in which circular
interpolation is performed, as XZ-
plane

11.5 Multi-axis Operation

WUME-GM1RTXOP-01

11-63

Содержание GM1 Series











































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды