Panasonic GA-ML24TPoE+, Руководство по установке

Страница: 13 / 23

13
Power LED
LED Display change
button
Temperature sensor LED
PoE LIM. LED
Status/ECO mode LED
GIGA mode LED
DUPLEX mode LED
Loop History mode LED

POWER LED (Power)
Green Light : Power is ON.
Off : Power is OFF.

PoE LIM. LED (PoE limit)
For silent fan control high-speed (High)* For factory default, or low-speed (Low2)
Off : Supplying power in the range from 0 to 355 W.
Green Light : Supplying power in the range from 355 to 370 W.
Orange Blink : A single port's power supply is exceeding the upper limit, or
the total power supply of the Ethernet Switch is exceeding 370 W.
For silent fan control low-speed (Low1), or min-speed (Min)
Off : Supplying power in the range from 0 to 153 W.
Green Light : Supplying power in the range from 153 to 168 W.
Orange Blink : A single port's power supply is exceeding the upper limit, or
the total power supply of the Ethernet Switch is exceeding 168 W.

TEMP LED (Temperature sensor)
Green Light : The system is normally operating.
Orange Blink : The temperature exceeded the set threshold of the internal
temperature sensor.
Set threshold of the internal temperature sensor: 61°C
(factory default)

FAN (Fan sensor) LED
Green Light : The system is normally operating.
Orange Blink : Fan failure

STATUS/ECO LED (Status/ECO mode)
Green Light : Operating in status mode.
Green Blink : Operating in ECO mode.
All Port LEDs (left) are turned off.
Orange Light : Starting
Orange Blink : Malfunction (Contact the seller.)

GIGA (GIGA mode) LED
Green Light : Operating in GIGA mode.

FULL (DUPLEX mode) LED
Green Light : Operating in DUPLEX mode.

LOOP HISTORY LED (Loop History mode)
Green Light : Operating in Loop History mode.
Green Blink : Loop is occurring, or occurred within
the last 3 days.
Off : No loop detection.
Fan sensor LED