295
9.2.8 802.1X Supplicant Port Settings
9.2.8
802.1X Supplicant Port Settings
The following window displays the configuration and state regarding the
function of IEEE 802.1X supplicant of the port specified.
Choose
Security > 802.1X > 802.1X Supplicant Port Settings
to display
the following window.
Figure 9-13 802.1X Supplicant Port Settings
In the section of
802.1X Supplicant Port Settings
, you can configure the
following parameters.
Parameter
Overview
Port
Choose a port to be configured.
Held Period
This parameter configures the necessary time for
waiting the next authentication when the supplicant
fails to authenticate. The range is from 0 to 65,535. The
default is 60 (seconds).
Authentication
Period
This parameter configures the necessary time for
waiting the request from an authenticator. The range is
from 1 to 65,535. The default is 30 (seconds).
Start Period
This parameter configures the transmission interval of
EAPOL when starting an authentication. The range is
from 1 to 65,535. The default is 30 (seconds).
Max Start
This parameter configures the maximum number of
EAPOL-Start packets transmissions.
The range is from 1
to 65,535. The default is three times.
State
This parameter configures to enable or disable a
function of a port supplicant.
•
Disabled
- Displays the statics since the reset of the
last switch (default value).
•
Enabled
- Displays the statistics since the boot-up of
the last switch.
Содержание GA-ML Series
