4
Do not install this Switching Hub at the location with continuous vibration or
strong shock, or at the unstable location.
Deviation could lead to falling, injury and/or equipment failure.
Do not put this Switching Hub into fire.
Deviation could lead to explosion and/or fire.
Use the bundled power cord (AC 100 – 240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Unplug the power cord in case of equipment failure.
Deviation, such as keeping connected for a long time, could lead to fire.
Connect this Switching Hub to ground.
Otherwise this might cause electrical shocks, misoperations and malfunctions.
Connect the Switching Hub via the supplied power cord to the outlet which is
connected to the ground.
If the outlet is not connected to a ground, connect the ground cable (AWG18:
green/yellow) to the ground terminal screw.
Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
If the STATUS (Status) LED blinks orange, unplug the power cord since this is a
malfunction.
Deviation, such as keeping connected for a long time, could lead to fire.
Handle the Switching Hub carefully so that fingers or hands may not be
damaged by twisted pair port or power cord hook block.
When connecting IEEE802.3at-enabled receiving equipment to the Switching
Hub, use a CAT5e or above cable. Using cables other than those could lead
them to cause heat to be generated, to catch on fire and/or cause
malfunctions.
When mounting the Switching Hub on a wall, mount it securely using wall
mount brackets (PN71053, optional) to prevent the Switching Hub from falling
due its weight and that of the connection cables.
Injuries and/or malfunctions could be caused due to the Switching Hub falling, etc.
Up to two Switching Hubs can be connected. When connecting two Switching
Hubs, use connection brackets and screws (for fixing the connection brackets)
supplied with 19-inch rack mount brackets (two coupled units)( PN71052,
optional) to securely fix the connection brackets to the connection screw holes
on the front and back panels, and then install the Switching Hubs. If the
Switching Hub is not fixed securely, injuries and/or malfunctions could be
caused due to the Switching Hub falling, etc.
Double pole / Neutral fusing
WARNING
CAUTION
