7
PRO3
PRO3 mode can load configuration settings from the data bank, i.e.
“channel”, and save configuration settings to the data bank.
PRO4
PRO4 mode is used mainly to configure communication with sub units.
Communication takes place only in the direction shown in the following
diagram.
PRO5
PRO5 mode allows you to make multiple settings at once based on codes,
adjust lock functions and reset the unit.
The 0-ADJ setting function was removed in May, 2005.
Code setting table
Mode
Setting
Description
Press the jog switch to load configuration
settings from the respective channel (1, 2 or
3). When the display blinks
, press
the jog switch to confirm.
Press the jog switch to save configuration
settings to the respective channel (1, 2 or 3).
When the display blinks
, press the
jog switch to confirm.
Mode
Setting
Description
_
Except for data bank information, settings
are copied to the sub units.
Press the jog switch to load the configuration
settings from each amplifier’s respective
remote channel (1, 2 or 3). When the display
blinks
, press the jog switch to con-
firm.
Press the jog switch so that each amplfier
saves its configuration settings to the
respective remote channel (1, 2 or 3). When
the display blinks
, press the jog
switch to confirm.
Communication lock function OFF.
You can load and save settings remotely.
Communication lock function ON.
You cannot load or save settings remotely.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
When copying data from the 4th unit, it will be copied to units
5 and up, but not to units 1-3.
Direction of communication
When copying data from the 1st unit, it will be copied to all sub units.
Back-up ON.
Back-up OFF.
Prevents frequent overwriting of data in the
EEPROM: the threshold values are not
stored in the EEPROM when teaching via
external input, e.g. with the FX-CH2 external
input unit for digital sensors.
Mode
Setting
Description
( F a c t o r y
setting.)
Choose a code from the code setting table
(See “Code setting table” on page 7.)
If any other code is entered, ' - ' is displayed.
1
Press the jog switch to select the first digit
in the code.
2
Turn the jog switch to select a number.
3
Press the jog switch to confirm the
number and move to the next digit.
Adjust lock ON.
You cannot adjust the threshold value in
RUN mode.
Adjust lock OFF.
You can adjust the threshold value in RUN
mode.
Press the jog switch to reset the unit.
Press <MODE> to cancel.
Mode
Setting
Description
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
5s
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
4s
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
3s
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
2s
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
1s
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
㧙
1ms
5ms
10ms
30ms
50ms
100ms
300ms
500ms
3ms
Std
S-d
Lon9
FASt
FASt
FASt
Lon9
Lon9
Std
Std
H-02
H-03
H-03
H-01
H-02
H-02
H-02
H-03
H-01
H-01
L-On
L-On
L-On
L-On
d-On
d-On
d-On
d-On
L-ON/
D-ON
digt
digt
---P
---P
PHLd
PHLd
bHLd
bHLd
non
ofd
ofd
ond
ond
osd
osd
non
ON
OFF
OFF
OFF
OFF
ON
ON
ON
1st digit
2nd digit
3rd digit
4th digit
Timer
Code
Timer
operation
Adjust
lock
Code
Display
Code
Hysteresis
Response
time
Code
OFF
