Panasonic FV-KTB2SD1HK, Руководство по установке

Страница: 6 / 14

How to use How to use
Control Panel Control Panel
Insert the plug into the power socket. With a beep, all the buttons on the control panel light up and last for about
1 seconds, and then go out.

Power on/off Power on/off
Touch the button, all the buttons light up with a beep (the
button turns white, the fan speed buttons
turn white lowlight, and the LIGHT button turns white lowlight) and the unit enters power-on state.
Touch the button in power-on state, all the buttons go out with a beep, and the unit enters the power-off
state.

Fan speed setting Fan speed setting
In power-on state, touch the
button to set the fan speed with a beep. (the button turns white, the
fan speed button being touched turns white highlight, and the fan speed buttons not being touched turns white
lowlight). The fan speed can be switched between "LOW", "HIGH" and "ULTRA HIGH" by touching fan speed
buttons.
When touching the fan speed button showing white highlight in the working state of the fan, the fan will stop
running with a beep.

Ultra high speed Ultra high speed
In standby state, touch the
button, the backlight of the button fl ashes with a beep. After the fan has been
running for 3 minutes in ULTRA HIGH mode, the fan enters a running state of HIGH mode with a beep; touch
the
button again within 3 minutes, the fan stops working with a beep.

Light on/off Light on/off
Touch the
button in power-on/off state, the LIGHT turns on/off with a beep.

Latency switch function Latency switch function
Touch the button when the fan is on, the backlight of the
button fl ashes with a beep, and the range hood
starts to perform the "Power-off latency" function. The fan will stop running automatically after running at low
speed for 3 minutes.
And the LIGHT turns off at the same time.
→ If you change the fan speed during the latency, the fan will work at the speed you set, and the current latency
function will be canceled.
In this case, the LIGHT remains unchanged.
→ If you touch the button during the latency, the current latency function will be canceled and the unit will
enter the power-off state.
In this case, the LIGHT remains unchanged.
6